Easee Logo

With Easee Ready (back plate and blind cover) you can prepare to get a future charging point at low cost.

To upgrade to a full charge point, you can at any time buy the Easee Plug & Play (Chargeberry and front cover in any color).

Its scalable thanks to our innovative Plug & Play technology. This allows you to easily scale the system without any additional electrical work.

  • Easee Ready – Prepared charging point for easy scaling as needed.

  • Easee Plug & Play – Mount the chargeberry easily even when the need for charging arises.

  • Easee Plug & Play – You do not need any tools, and avoid assistance from an electrician. Ready, set, go

  • Easee Ready – Comes with a seamless blind cover that is easy to click on or off

  • Easee Ready – Available for both Easee Home and Charge

Why choose Easee Ready?


Easy to scale

We understand that charging needs change over time. Therefore, it should be easy and inexpensive to expand the charging system. The charging robot acts as an intelligent junction box and it supports the expansion of several charging stations on the same cable. This allows you to easily scale the system when the need for charging changes.

More reasons to choose Easee Ready Pluss

  • Prepared charging point at low cost.
  • Supports extension of multiple charging robots on the same cable.
  • Available for both Easee Home and Easee Charge.
  • Developed and produced in Norway.

Prepared charging point

With a connected and programmed Easee Ready backplate, you get the parking space ready for future electric car charging at a very low cost.

Simple to Install

With Easee Ready, you choose when you want to complete the charging point only adding the hardware upon demand .When the need for charging arises, order the Easee Plug & Play and mount the charging robot.

Plug & Play

The patented Easee Ready backplate enables the installation of an Easee Plug & Play charging robot in just 15 seconds.

Easee Plug & Play

With Easee Ready installed, there is no need to pay extra to install Easee Plug & Play. By following the instructions, anyone can easily connect the Plug & Play charging robot and the front cover. Quick, safe and easy.

2 simple steps

Assemble yourself
in 15 seconds

1. Easee Ready

The Easee Ready backplate must be connected and programmed. When the need for charging arises, order the Easee Plug & Play charging robot with front cover in the desired color.

2. Easee Plug & Play

Click off the blind cover, slide in the Plug & Play charging robot, and then click on the front cover. Any competent person can do this. Ready, set, go!