Easee Logo

We have developed a charging robot that makes it easy and affordable to invest in modern and forward-looking charging infrastructure. Easee Charge is developed and manufactured in Norway. The technology in the box is revolutionized in a way that makes it lightning intelligent. Not only does the Easee Charge replace the electrical outlet, but it also gives you more power, smarter control and a higher level of security.

Apartment EV Charging, Car Park EV Charging, Commercial Electric Vehicle Charger, Commercial Electric Vehicle Chargers, Commercial Electric Vehicle Charging Point, Commercial Electric Vehicle Charging Station, Commercial EV Charger, Commercial EV Chargers, Commercial Vehicle Charger, Commercial Vehicle Chargers, Workplace EV Charging

  • Accessories – Easee Charging Cable

    Type 2 switch, 3 phases and a maximum current of 32A.

  • Accessories – Easee Key

    RFID chip with access control and pay for the power you use (kWh).

  • With external parking facilities it is convenient to use charging posts.

    With the option of placing either one, two or four charging stations on the same pile.

  • Accessories – Easee Cover

    We have covers in five different colours. You choose the one you like best.

  • Accessories – Easee Ready

    Prepare charging point for easy scaling if needed.

  • Accessories – Easee Portal

    Provides full overview of your installation. Here you can manage charging robots, bill electricity consumption, see the status of the plant and more.

Why choose Easee Charge?

Innovative
commercial charging

Easee Charge maximises the available electrical capacity in your building. When multiple charging robots are connected to the same fuse, the available energy on the circuit will be automatically and dynamically distributed between the units.

Several reasons to choose Easee Charge Pluss

  • Fully dynamic charging power 1.4 – 22kW (1 and 3 phase charging)
  • Reduces capacity requirements by up to 90%.
  • Load balancing of up to 101 chargers per fuse
  • Automatic queuing system
  • The load and phase balancing works offline
  • WIFI connectivity
  • Integrated 4G in each box (e-sim), free subscription included for life
  • Permanent locking of the Type 2 cable
  • Integrated earth fault protection – (Integral-type B RCD)
  • Integrated RFID reader (NFC / ISO 14443 and MiFare Classic)
  • Supports whitelisting of RFID tags, approved tags is automatically stored locally in each charging robot
  • Energy measurement (+/- 3%), -for reading charge consumption
  • Developed and manufactured in Norway
  • The box is 69% smaller than other solutions and weighs only 1.5kg
  • 3 year warranty, from the day the charger is installed
  • Universal, fits all types of electric cars & power supplies
  • Manual and digital control (Free Easee app)
  • You choose the colour

101 units

Load balancing

Easee enables load balancing of up to 101 Charging Robots on a single circuit. It can operate both online and offline.

22 kW

Powerful

The charger can charge on both 1 and 3 phase and supports charging up to 22 kW. It has a Type 2 universal charging connector.

10 x

Fast charging

With Easee Charge, you can charge up to 10x* times faster than with a regular outlet. It charges as quickly as possible with the available capacity and provides you with the highest charging power.

4 G

Internet access

The Charging Robot is equipped with built-in E-sim and mobile communication. The type of communication may vary, but the charging robot supports a variety of standards such as 2G, 4G and CAT-M1. We are using an operator which is utilizing the Telia network in Norway with Telia roaming partners in Europe. If you buy now you get a 4G subscription included for life.

24 /7

Always updated

The Charging Robot is updated with new features continuously. This way, you know that you have purchased a safe and future-proof product.

69 %

Small

The Charging Robot is 69% smaller and lighter than other electric chargers, with similar functionality. It weighs only 1.5kg! This means that we save the environment at least 4 kilos of copper and plastic per produced charger.

Easy to scale

We have made it easy and affordable to invest in modern and forward-looking charging infrastructure. With “Easee Ready” docking station you get a completely EV ready charge point at low cost. By pre-installing the infrastructure within the building, upon demand Easee Charge can subsequently be deployed with our innovative “Plug & Play” technology at no additional installation cost.

The charging robot acts as an intelligent junction box and it supports the expansion of multiple charging stations on the same cable. This allows you to easily scale the system

Fair charge and cost distribution

The charging robots have a fully autonomous load balancing system built-in ensuring that the power draw is evenly balanced.

The intelligent queuing system ensures that all cars are charged without overloading the available power supply. The Easee Charge measures accurate power consumption through its built-in power meters. When a charging station has multiple owners, you can keep track of the power consumption of each one, by registering their charge with a RFID chip or through the app.

How to buy Easee Charge?

Contact us

Contact us to order Easee Charge. Installation from one of our selected installer partners are included.

Read more about our installers Pluss

Quality

Our installers have extensive experience and go far to provide high quality services.

Efficiency

Your time is valuable and should be spent on what is most important to you. Installers respect this and therefore deliver an efficient installation.

Safety

Installers strive to provide the customer with the best installation experience in the world and are helpful if you have any questions.

4 easy steps

Installation from
start to finish

1. Set up infrastructure

Start by investing in charging infrastructure. All you need is one circuit taken out to the parking area. Easee Charge supports up to 101 units per circuit.

2. Prepare the backing plate

The backplate is mounted on the wall using the 4 wall-screws supplied in the installation kit. Use appropriate wall plugs for different types of walls. If you have multiple backplates, now would be a good time to mount them as well!

3. Plug in electronics

If the installation has more than two charging robots, place the electronics in the center back plate first. The backplate on which this charger is mounted will always be the main unit. Plug in Charging Robot, and now configure; see ‘Quick Guide‘ for more details.

4. Expand the system

Depending on how many backplates were installed initially, you can expand the system by plugging in more Charging robots on demand.